Auto Labelling : Ability to individually adjust Label Positions for machines with auto labelling.
Base1 : Ability to add multiple Corner Profile (cleaning) routes to square corners of the Door edge or its Profiles.
Diagonal : New door with 'Diagonal' window bars.
Output Path : Ability to select whether the Job Number and/or the Material is included in the path.
zzVanity : Ability to have the routed windows follow the panel's shoulder when the shoulder width is greater than the routed profiles border.
zzVanityFront : Ability to Radius the bottom.
zzVanityFront : Ability to add a single row of Windows, with separate sizing for the outer windows.
zzVanityFront : Back Face machining added.
zzVanityFront : Ability to add a Special Machining from tables.
Bug Fixes
Pilaster : Upper Roses were displaying correctly within DoorMaster, but was corrupted not in the exported DXF.
Sunburst : The machining of the "D" at the centre of the 'sun' was being negatively offset when multiple tools used.
Base 1 to 6 and zzVanityFront : Glass Border inputs were strings and not lengths.
All Doors : Profiling routing not positioned correctly when a Drawerbank and the drawer profiles cut for individual drawers.
Base 1 : Corner Profile machining was converting to a length instead of remaining a numeric, thus causing rounding errors - especially when using imperial units.
Base 1 : Corner Profile machining was not taking Panes into consideration.
Base 1 : Corner profiles - Top right profile had some routes at wrong depths.
zzAppFrame : Unable to independently turn off Edge profile on Left, Right and Top.
zzVanity : The Routed Profile was always assuming the Radius of the Arch was fixed. Therefore, when the Height of the Arch was selected it did not adjust the Radius when the Shoulders were then made different to the profile's Border.
zzVanity : Glass Routed profiles not always following non-glass routes correctly.
