All Doors : Ability to control the distance between upper and bottom panes separately from the horizontal 'bar' height.
All Doors : Ability to define the default content of the "Description" column in the Door List
All Doors : Ability to make foldback panels.
All Doors : Ability to extend edging with oversize/foldback.
All Doors - Ability to adjust the glass position within the frame (as if a frame within the frame).
All Doors : Option to set the Foldback thickness to be maximum or minimum (and so adjusting with door thickness automatically).
All Doors - Special holes and boring. Ability to specify the number of routes and/or bores in the "Use' column within the specials tables using rows "RouteQty" and/or "BoreQty". Without these the maximum is 5.
All Objects : Ability to add engraves/cutouts by using existing DXF files.
Base1 : Ability to add just a single set of Through Veins (on one side of the outer panes), when multiple panes across door.
Drawers : Ability to cut have the arch of a profile on the top drawer when drawers that are cut separately.
Edge Profile : Ability to carry edge profile through to end of part when no edge profile on that side.
Shelf Angled : Ability to radius the corners.
WOFrame : Option to have only one cutout area
WRFront : Ability to have cutouts output into separate DXF (Back Face) to allow cutting after item is finished (e.g. vinyl wrapped).
NEW Item : Pilaster with up to four faces and options for flutes & roses.
Pilaster - Ability to include (or not) the pattern on each face separately.
Pilaster : Independent Tool and Depth for Flute and Dividing Lines.
Pilaster : Fold cuts were not taking the thickness of the Finish into account. It is assumed that the Fold Cut machining on the Back face is to be undertaken after the finish is applied (e.g. Vinyl Wrapping).
Bug Fixes
WOFrame and AppFrame - Various radius issues concerning edge profiles.
All non-door items causing messages concerning DrwMakeAs when machining exported (this should not have caused any actual machining issue).
Pilaster : Roses were using the Dividing Line depth.
Pilaster : Lower half of Lower Circular Rose was using the diameter of the Upper Rose.
All Doors : Foldbacks were not taking the thickness of the Finish into account. It is assumed that he foldback machining on the Back face is to be undertaken after the finish is applied (e.g. Vinyl Wrapping).
All Doors : The Profiles were being offset up the door by the thickness of the Finish.
